The TR 5150 is designed in accordance with GB/T531, JB6148 and JJG304 standards. This hardness tester (rubber hardness tester) is widely used in the hardness determination of rubber and plastics. It has the characteristics of simple structure, easy to use, small size and light body, intuitive reading, etc., which can be carried with you for hand-held measurement, or can be installed on the same type of load rack for supporting production.
Ordering Information:
TR 5150A/D/C – Shore Hardness Tester
1.TR 5150A Shore hardness tester is widely used in the hardness testing of medium and low hardness plastics, various types of rubber, polyester, leather, wax, etc
2.TR 5150C is suitable for the determination of microporous materials containing foaming agents with a stress of more than 0.5kg/cm² at a compression rate of 50%.
3.TR 5150D Shore Hardness Tester Hardness Testing of High Hardness Materials such as Ebonite Rubber, Hard Resin, Acrylic, Plexiglass, Thermoplastics, Printed Plates, Fibers, etc.
Technical parameters | TR 5150A | TR 5150C | TR 5150D |
Measuring range | 0-100H | ||
Measurement error | Within 10-90 degrees, the error is ±1 degree | ||
resolution | 1 degree | ||
Pressure pin stroke | 2.5mm | ||
Product dimensions | 115×60×25mm | ||
weight | Approximately 160 g | ||
Pressure at the end of the pin | 0.55N-8.05N | 0.55N-8.05N | 0-44.5N |
Pressure pin head size | Ф 0.79 mm | SR2.5mm | SR0.1MM |
Note: The load test bracket can be used with the optional to make the test more stable and accurate.
