Putty Film Flexibility Tester produced by TRUIT is designed in accordance with GB/T 1748 standard. Widely used in the paint coating industry, the judgment of cracks and falling off of the putty film layer after the bending of the putty film layer, the instrument structure is reasonable, convenient and reliable to use.
Ordering Information:
TR 5240 – Putty Film Flexibility Tester
The instrument is mainly composed of two parts, the press frame and the demould, when using, the hold-down roller handle and the press frame are placed at the rear end of the supporting form, so that the supporting film is completely exposed, then the sample is inserted into the small groove of the rear end of the supporting film and the eccentric shaft is pressed against one end of the template with the pressing handle, and then the pressing frame is moved down, and the template is uniformly bent and deformed along the surface of the supporting film through the rolling shaft on the pressing frame, and the pressing frame is moved to the positioning Xiao for the upper and finally the physical change of the surface of the putty film of the model is observed.
The specifications are divided into two kinds:
The shaft rod 1 is 80mm in length and 100mm in diameter
The length of the shaft rod 2 is 80mm, and the diameter is 50mm
